Disclaimer

Prop 65NOTICE: If any items are sold or distributed in the State of California, a warning under a California Law, the Safe Drinking Water and Toxic Enforcement Act of 1986 (often referred to as “Proposition 65”), may be required.

CPSIA

Adglass offers no products designed primarily for children age 12 or under. Therefore, Adglass complies with the requirements of the Consumer Products Safety Improvement Act (CPSIA). Only the distributor and/or end customer, in the employment of targeted art or specific advertising, render a product subject to CPSIA requirements. The CPSIA employs key factors in determining Children’s Products. *Intended use primarily for children age 12 or under. *Marketing/Advertising specifically targets age 12 or under. *Consumer recognition of product as primarily intended for children age 12 or under. *The Consumer Product Safety Commission (CPSC), further states that “If a product is Intended for adults or for general use by consumers of all ages, then it is not intended primarily for children.”All products offered by Adglass are for general use by consumers for all ages; none are intended primarily for children age 12 or under. Adglass is not liable for customer marketing/advertising decisions and expressly does not indemnify the distributor or its customers for products marketed/advertised as intended primarily for children age 12 or under.

Artwork Readiness

An electronic art file is considered “ready” when the artwork is used as delivered. Any modifications that need to be made to the artwork may result in extra charges or delays.

Mechanical Artwork

The traditional standard for acceptable mechanical artwork is “camera-ready” black-and-white material. Any modifications that need to be made to the artwork may result in extra charges or delays.

Art Files

Artwork supplied in AI and EPS formats are preferred(Adobe Illustrator). Any image printing in more than one color should have a “spot color” assigned to the desired image area. For one-color prints, assign the designated imprint color as a “spot-color” as well. Any typeset paths within the file must be converted to outlines. Line thinknesses cannot be below 0.5 pts. This will ensure optimum quality for your print. TIFF Files, and JPG files are also acceptable, though they MUST be at least 300dpi, black and white – No Halftones.

File formats that cannot be accepted are: Word documents, JPEG images, GIF images, or bitmaps (BMPs). These formats do not have the flexibility we need to produce the best quality prints.

Please provide a printed proof with your art file. If in electronic form, please send a PDF attachment along with your art file to art@adglass.com

Always be sure to include your company name and your purchase order number. Our designs are PC-based and we can accept the following media types: ZIP disks, CD-Roms, and above mentioned formats sent by e-mail.

If you have any questions about artwork readiness, please email us.

Quality of Glassware and Ceramics

Our line contains a variety of quality printed glass and ceramic items. Because of the nature of glassware and ceramics, we cannot guarantee 100% consistency. Variations of material, firing temperatures, glaze, and pigment can cause small differences in final products, which must be considered acceptable.

F.O.B. Points and Freight Claims

Prepay single point shipments are made F.O.B. Factory, Denver, Colorado. Factory will call pick up is available. All multiple drop shipments and 3rd party billings ship from F.O.B. Factory Denver, Colorado. Title and responsibility for the goods passes to the buyer upon tendering of the goods to the carrier at the F.O.B. point or upon sending the invoices for finished goods, whichever occurs first. Claims for damages or delays in transit must be filed with the carrier if shipping collect or third party. As a courtesy upon request, Adglass may accept breakage claims for the ware portion of shipments made on small package carriers, whether shipped on our account or yours. A claim for the freight portion must be made by the party paying for the freight. All freight claims must be made within ten (10) working days of shipmejnt.

Inside and Residential Deliveries via Motor Freight Carriers (LTL)

Orders requiring inside or residential delivery must be noted on your purchase order. Failure to do so may result in delayed delivery and additional freight charges forwarded to you after the initial invoice is issued. Please specify inside delivery and the suite/room number or floor on the purchase order. Any delivery beyond a loading dock may be considered an inside delivery. If an inside delivery is requested at the time the delivering carrier attempts to deliver, be advised you will receive an additional invoice for this service in addition to your original invoice.

Indemnity

Any art file submitted by you or your client will be accepted as being submitted in full compliance with all laws regarding copyright, trademark, service mark, patent, right of privacy, or similar type of protection. You and your client agree that submitting such material for our use in producing an order, these laws will not be violated and Archer Glass disclaims all liability for compliance with these laws.

Ceramics – Use in the Food-Service Industry

Porcelain and stoneware products shown in this catalog are not recommended for continual use in a bar or restaurant environment. All capacities are liquid measurements. If you are filling one of these items with a dry measurement, it will not relate to the liquid capacities we have provided.

Country of Origin

Select pieces of our line are imported and may be identified with the country of origin. United States customs regulations require that all imported goods be clearly marked with the country of origin.

Size and Position

Your purchase order must clearly specify if artwork is one side, two sides, opposite the handle, or a wraparound. Your order must also clearly state if the art is to exact size, or if it needs to be enlarged or reduced. In absence of these instructions, we will use our own discretion. If the order is lacking specific instructions for the art size and location, no claims will be processed. Imprint locations are defined as follows:

  • Imprint faces right-hand drinker (RHF)
  • Imprint faces left-hand drinker (LHF)
  • Two-sided has one image per side
  • Opposite the handle
  • Wraparound has one continuous image which wraps around from the RHF to the LHF.

Production Time

Standard production time is 10 business days after the order is received, provided that your printed proof accompanies your purchase order or e-mail. Orders needing pre-production samples, artwork, or special packaging may extend the shipping time. Any changes to the order or artwork may also cause a delayed shipment. During the peak months of September – December, production and shipping time may be extended as well, we will try to process your order as quickly as possible in all situations.

Pricing

Due to material cost fluctuations, prices throughout this website and on our downloadable catalog pages are subject to change without notice. Decorative Glass Corporation, DBA Archer’s Decorative Glass Corporation is not liable for any typographical errors contained in this web site or any of the downloadable materials.